Soap Cutting And Stamping Machine

Pneumatic Cutting Machine

 ·          The Pneumatic Cutting Machine Is Designed to Cut Bars and Cut Into Billets/cakes

 ·          Fitted with Inline Conveyor and Hinged Bar Cutter to Place Near the Plodder

 ·          Sensor Based Bar Cutting to Cut Equal Repeat Lengths Minimising Trimming Waste

 ·          Conveyor Is Driven by 0.5 Hp Bonfiglioli Geared Motor / Inbuilt PLC Control Panel

 ·          Top of the Cutting Table Is Covered with SS Plate and Slot for Cutting Frame Insert

 ·          One Size Cutting Frame Provided Along with the Machine. Additional Set Cost Extra

 ·          No Stamping System in Standard Machine.One Side Stamper Provided at Extra Cost

• The automatic soap cutting and stamping machine is used to cut soap bar from the plodder,  Cut the soap to billets and stamp the necessary logo. 
• The primary cutter cut the bars from the plodder at equal repeat lengths. 
• The cutting system works based on the position of the sensor.
• User-friendly system to vary lengths of bars.
• Bars are conveyed to cutting and stamping machine through a conveyor.
• The bars are sensed automatically and pushed forward for secondary
• bar cutting and stamping.
• The soap bars are dispensed to the off take conveyor to the wrapping machine.
• The machine is provided with a cutting frame to cut the bars.
• The trimming waste is taken out by a conveyor and fed to the inclined belt conveyor for cutting waste recycling.
• All the pneumatic components are FESTO / SMC make.
• Geared motors are from BONFIGLIOLI.
• The machine is designed with the flexibility for quick change over system between pack sizes.

• The automatic soap cutting and stamping machine is used to cut soap bar from the plodder,  Cut the soap to billets and stamp the necessary logo. 
• The primary cutter cut the bars from the plodder at equal repeat lengths. 
• The cutting system works based on the position of the sensor.
• User-friendly system to vary lengths of bars.
• Bars are conveyed to cutting and stamping machine through a conveyor.
• The bars are sensed automatically and pushed forward for secondary 
• bar cutting and stamping.
• The soap bars are dispensed to the off take conveyor to the wrapping machine.
• The machine is provided with a cutting frame to cut the bars.
• The trimming waste is taken out by a conveyor and fed to the inclined belt conveyor for cutting waste recycling.
• All the pneumatic components are FESTO / SMC make.
• Geared motors are from BONFIGLIOLI.
• The machine is designed with the flexibility for quick change over system between pack sizes.

Toilet soap stamper-Automatic-T120 (TS-STM-AH120)

 ·          The Automatic Stamping Machine Is Used to Stamp Banded and Bandless Soap

 ·          Billets Infeed Conveyor Placed Parallel Or Perpendicular to Die and Die Box

 ·          Driven by 5 Hp Geared Motor Connected to Heavy Duty Indexing System

 ·          Speed of the Machine : Up to 120 Cakes Per Minute

 ·          Machine Is Constructed on A Sturdily Casted Structure to Avoid Vibrations

 ·          Stamped Cakes Are Ejected Out Through the Discharge Conveyor

 ·          Inbuilt Recycling Conveyor to Take Back the Recycle Soap to Plodder

 ·          Design of Soap Shape Plays Vital Role in Providing Elegance to the Soap Bar

 ·          Centralised Lubrication System to Lubricate on A Daily Basis to All Moving Parts

 ·          Safety Interlock Limit Switches Provided and All Moving Parts Are Covered Suitably

 ·         One Set of Dies Provided with Basic Machine. Addional Set of Dies Cost Extra

Toilet soap stamping machine - HO (TS-STM-HO)

 ·          The Hand Operated Soap Stamping Machine Stamps the Billet to Desired Die Shape

·          Billet Need to Be Fed Manually One by One to Die and Die Box

·          Eccentric Weight on the Stamper Activates the Force Required to Stamp Manually

·          Ejection Rod Provided at the Bottom / Fixtures Provided to Fix the Die and Die Box

·          Set of Die and Die Box Cost Extra.